Product Name : EPD65 65W PD SMART FAST TRAVEL CHARGER
Product No : EPD65
Product Description

MODEL : EPD65 PD SERIESWattage Rage 65W Voltage range +3.3V/4.5V/5V/9V/12V/15V/20V Smart Selectable

PD Smart Fast Travel Charger

EPS65 65W design Special for Travel Passenger easier for carry when travel, Very small size High Density power Gan Technology Designed and High compatibility with Notebook Pad Cellule phone I.T.E equipment auto identify selectable Voltage+3.3V~20V Charging ,Three Type output Port 1A+2C convenient to use at one time fast charging three Devices ,Compliance with PD3.0/QC4.0/PPS Charging Protocol, Global safety approvals such as UL/CE/CB 62368-1 standard The no load power consumption < 0.075W which comply with EISA 2007 / DoE 6 & EU ErP, CoC 5 Tier2 and RoHS compliance. We designed 4 type Interchangeable AC Plug During travel or at home use.

  • Universal Input (Full Range 100-240V AC)
  • Interchangeable AC Plug US/UK/EU/AU for Traveling
  • Best Electro Magnetic Interference under 6db for Production
  • Gan Technology High Density Power Efficiency Gan >=93%
  • All output +3.3/5V/9V/12V/15V/20V Smart Selectable Voltage
  • Meet USB PD3.0/QC4.0+/PPS Charging Protocol
  • Type 1A+ 2C Output Port Multi Ways Fast Charging at Same time
  • No Load Power consumption >=0.075W
  • Very Small Size L77 x W40 x H29 mm
  • Light Weight <120g.
  • Constant Voltage Mode
  • Low Leakage Current P-S <=0.25mA
  • Efficiency Compliance DoE/ErP tier 2/CEC
  • Damage Protection OCP/OLP/OVP/Short Circuit
  • Class II Isolation
  • Safety Agency Approval UL62368-1/CB/CE
Model No.EPS P/NI/P Vol.Output PortO/P Vol.O/P CurrentO/P Watts (max.)Remark
EPD65 EPD65-2C1A 90~264VAC USB C1 3.3V 3.00A 65W Smart Selectable
5V 3.00A
9V 3.00A
12V 3.00A
15V 3.00A
20V 3.25A
USB C2 3.3V 3.00A 65W  Smart Selectable
5V 3.00A
9V 3.00A
12V 3.00A
15V 3.00A
20V 3.25A
USB A1 4.5V 5.00A 30W  Smart Selectable
5V 4.50A
9V 3.00A
12V 2.50A
15V 2.00A
20V 1.50A
EPD65 EPD65-2C 90~264VAC USB C1 3.3V 3.00A 65W Smart Selectable
5V 3.00A
9V 3.00A
12V 3.00A
15V 3.00A
20V 3.25A
USB C2 3.3V 3.00A 65W  Smart Selectable
5V 3.00A
9V 3.00A
12V 3.00A
15V 3.00A
20V 3.25A
 EPD65 EPD65-1C 90~264VAC USB C1 3.3V 3.00A 65W Smart Selectable
5V 3.00A
9V 3.00A
12V 3.00A
15V 3.00A
20V 3.25A

Remark

Output Port can be Single or Multiple Combination use as below power sharing Max.
Output Port Power Sharing

USB C1USB C2USB A1Total
65W     65W
  65W   65W
    30W 30W
45W 18W   63W
45W   18W 63W
45W 7.5W 7.5W 60W
Input Voltage 90 ~ 264 VAC
Input Current 1.2A Max.
Efficiency 93% type. at full load, (Voltages 20V)
(Avg. Eff.) fit requirement for CEC/Erp models level VI Commission Regulation (EU) 2019/1782 
No load power consumption <=0.075W
Output Voltage +3.3/+4.5/+5/+9/+12/+15/+20V  Multiple output power sharing (Rise Time 10mS)
Voltage Regulation ± 5% max.
Max Power 65W 
Withstand Voltage I/P - O/P : 3000 VAC (Class II)
I/P - O/P (V+) : 4242 VDC, I/P - FG : 2121 VDC (For Class I)
Operating Temperature -10℃ ~ +60℃
(derated linearly from 100% load @ 40℃ to 50% load @ 60℃)
Storage Temperature -20 °C ~ +85 °C
Operating Humidity 20% to 90% RH
Protections OPP,OVP, OLP. Short Circuit Protection
Safety standard to meet IEC / EN 60950-1/62368-1, CE, LVD, ErP tier 2
EMC Standard (EN55032,EN55035, CISPR22, FCC Part 15) Class B,
EN61000-3-2, 3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55035
ESD EN61000-4-2 air ± 8kV , Contact ± 4kV
MTBF Calculated per MIL-HDBK-217F @ 25°C GB >50,000 Hrs
Standard output connector USB Type Cx2 ,USB Type A
Output Cable USB C-C 1M Length 3~5A
Weight main body  ~=120g
Size L77 x W40 x H29 mm
Warranty 2 years

Notes

  • All parameters are specified at 115VAC input, rated load, 25 70% RH ambient.
  • Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 f & 47 f capacitor.
  • DC voltage: The output voltage set at point measure by plug terminal & 50% load.
  • Tolerance: includes set up tolerance, line regulation, load regulation.
  • Line regulation is measured from low line to high line at rated load.
  • Load regulation is measured from 10% to 100% rated load.
  • Derating may be needed under low input voltage. Please check the derating curve for more details.
  • The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.